Removing Clogs - Panasonic MC-UG787 Instrucciones De Operación

Body Hose
Tuyau
Manguera
Hose Inlet

Removing Clogs

Clean Out Port
Sortie de
nettoyage
(Clean Out Port)
Cubierta de salida
(Clean Our Port)
Nozzle Hose
Tuyau de tête
d'aspiration
Manguera de
Boquilla
Entrée du tuyau
Conección de
manguera
The body hose located on the back of
the vacuum cleaner carries the dirt from
the nozzle up to the dust bag. If the
hose should become clogged:
Unplug vacuum cleaner.
Pull open CLEAN OUT PORT and
check for clogging. Secure suction
inlet cover properly after checking.
Disconnect body hose from wand
holder and check hose ends.
Plug in vacuum cleaner and turn on.
Stretch body hose in and out to
remove clogs that may not be seen.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate. See: "Removing
and Installing Lower Plate"
Inspect inlet of nozzle hose and clear
any obstructions.
- 44 -