Cleaning Agitator; Cleaning Exterior And Tools - Panasonic MC-UG787 Instrucciones De Operación

Tabla de contenido

Publicidad

Clean exterior using a clean, soft cloth that has been dipped in a solution of mild
liquid detergent and water and wrung dry.
DO NOT drip water on vacuum cleaner
Wipe dry after cleaning.
DO NOT clean tools in dishwasher or clothes washer.
Wash tools in warm soapy water, rinse and air dry.
DO NOT use tools if they are wet.

Cleaning Agitator

Cleaning Exterior and Tools

- 42 -
Clean agitator after every five uses
and every time the belt is replaced.
Remove lower plate. See: "Removing
and Installing Lower Plate"
Cut off any hair, thread, string, carpet
pile, and lint entangled around
agitator with a pair of scissors.
Remove agitator. See: "Replacing
Belt"
Remove any string or debris located
on the end caps, washers or agitator
shaft.
Reinstall agitator and lower plate.
See: "Removing and Installing Lower
Plate"

Publicidad

Tabla de contenido
loading

Tabla de contenido