Packing And Transport; Use Of Tool Use; Use Of The Tool; Tool Use - CAMPAGNOLA Cobra V.Evo Manual De Uso Y Mantenimiento

WORNING!
Never work on trees or ladders, since it is extremely dangerous.
Before starting any task with the tool, wear protective cloths. Check that all the safety and protection devices can
perfectly work and have been exactly assembled.

4.2 Packing and transport

The tool is packed by Campagnola s.r.l and transported to the dealer inside a case and a plastic box.
WORNING!
Any transport operations must be carried out in compliance with the current safety rules as to working places.
5

USE OF THE TOOL

5.1 Tool use

•
Wear the backpack (4) (picture F) adjusting the belt length by means of its buckle (3).
The backpack (4) shall be positioned in such a way that 90% of its weight is supported by the operator's waist, instead of
•
his back (picture F).
•
The braces (28) shall be used to improve the weight balancing.
•
Adjust the braces buckle (2) so that they cannot slip from the shoulders.
•
Remove the shear from the holster (5) holding it in your hand.
•
Wear the arm cable-fastener (26) to keep the cable (12) off the cutting operations.
•
Switch on the ON/OFF selector (position I) with your free hand.
•
Handle the shear.
•
Press the selector button (22) in sequence with your free hand and choose the operating mode:
Start:
The 1st menu can be entered by pulling the trigger a couple of times.
1st menu modes:
The 2nd menu can be entered by keeping the selection button pressed for at least 2 seconds.
2nd menu modes:
Campagnola Srl – USE AND MAINTENANCE MANUAL – Translation of the original Instructions
Ver.1.0 - Rev.: 01, Data: 21/01/2016 Mod. FOEL.600/601/602 - POWE.0200
Pag.33