Installation And Connection; Functional Diagram; Heat Pump Unit - Hayward SumHeat FULL INVERTER Manual De Instalación E Instrucciones

3. INSTALLATION AND CONNECTION

3.1 Functional Diagram

Note: The swimming pool heat pump unit is sold without any treatment or
filtration equipment. The components presented in the diagram are
spare parts to be supplied by the installer.

3.2 Heat pump unit

Place the heat pump outdoors and away from any enclosed technical
space.
Placed in the shade or near an obstacle, the minimum required
distances mentioned below must be respected in order to avoid any risk
of air recirculation and a deficiency in the unit's overall performance.
Unit: mm
700 mm
Air inlet
8
Water outlet
valve
By-pass
valve
Water Inlet
valve
Air outlet
700 mm
Air inlet
Chlorinator cell
(or other treatment)
Filter
Pump filtration
Air outlet
Water outlet
Pool
700 mm
Air inlet