Kobalt 50 PIECE AIR TOOL KIT Manual Del Usuario página 4

WARNINGS INHALATION HAZARD
WHAT COULD HAPPEN
Abrasive tools, such as grinders, sanders and cut-off
tools generate dust and abrasive materials, which
can be harmful to human lungs and respiratory
system.
Some materials such as adhesives and tar contain
chemicals whose vapors could cause serious injury
with prolonged exposure.
RISK OF INJURY
WARNINGS
WHAT COULD HAPPEN
A tool left unattended, or with the air hose attached,
can be activated by unauthorized persons leading to
their injury or injury to others.
Air tools can propel fasteners or other materials
throughout the work area.
A wrench or a key that is left attached to a rotating
part of the tool increases the risk of personal injury.
Using inflator nozzles for duster applications can
cause serious injury.
Air tools can become activated by accident during
maintenance or tool changes.
Air tools can cause the workpiece to move upon
contact, leading to injury.
Loss of control of the tool can lead to injury to self or
others.
Poor quality, improper or damaged tools such as
grinding wheels, chisels, sockets, drills, nailers,
staplers, etc., can fly apart during operation,
propelling particles throughout the work area causing
serious injury.
Fasteners could ricochet or be propelled causing
serious injury or property damage.
HOW TO PREVENT IT
Always wear properly fitting facemask or respirator
when using such tools.
Always work in a clean, dry, well-ventilated area.
HOW TO PREVENT IT
Remove air hose when tool is not in use and store
tool in secure location away from reach of children
and untrained users.
Use only parts, fasteners and accessories
recommended by the manufacturer.
Keep work area clean and free of clutter. Keep
children and others away from tool while it is in operation.
Keep work area well lit.
Remove adjusting keys and wrenches before turning
the tool on.
DO NOT use inflator nozzles for duster applications.
Remove air hose to lubricate or add grinding
attachments, sanding discs, drills, etc. to the tool.
Never carry the tool by hose.
Avoid unintentional starting. Don't carry hook-up
tool with finger on trigger.
Only an authorized service representative should do
repair servicing.
Use clamps or other devices to prevent movement.
Never use tool while using drugs or alcohol.
Don't overreach. Keep proper footing and balance.
Keep handles dry, clean and free from oil/grease.
Stay alert. Watch what you are doing. Use common
sense. Do not operate tool when you are tired.
Always use tool attachments rated for the speed of
the power tool.
Never use tools, which have been dropped, impacted
or damaged by use.
Use only impact grade sockets on an impact wrench.
Do not apply excessive force to the tool; let the tool
perform the work.
Never point discharge of tool at self or others.
Do not pull trigger unless tool contact safety device is
against work surface.
Never attempt to drive fasteners into hard surfaces
such as steel, concrete, or tile.
Avoid driving a fastener on top of another fastener.
Position tool carefully so that fasteners will be
delivered to the proper location.
4