Festo CPV-SC Manual De Instrucciones página 16

3 Controlling the valve terminal
Control the valve terminal in a uniform manner. Preferably,
all control signals should be positive-switching (1-switch-
ing), otherwise negative-switching (0-switching). Mixed
mode control is not permitted.
3.1 Address assignment of the valves
– Assign the addresses in ascending order without gaps.
– A valve location always occupies 1 address.
– Counting beginning from left to right.
Example of address assignment (seen from above):
1
0 1 2
2 3
Address of solenoid /
1
valve slot number
2 A double-solenoid valve
occupies two valve locations
16
3 4 5 7 8
6
2 3
A single-solenoid valve
3
occupies one valve location
Festo CPVSC-... 0112NH English
9 10 11