SOLAC Q606 Instrucciones De Uso página 7

circle and shave in small range re-
moving to and forth on clothes.
For sticking lint, move on the
•
clothes perpendicularly and paral-
lel until is removed.
On thin texture clothes, pile them
•
up into two layers and shave them
gently.
On clothes with protrudes or ap-
•
plications, avoid contact with the
applications or protrudes.
On clothes with patterns, move the
•
appliance in the direction of the
pattern for better results.
Once you have finished using the
•
appliance:
Stop the appliance using the on/off
•
button.
Remove the fluff container and
•
empty it accordingly. (Fig.5).
Clean the appliance.
•
CLEANING
Disassemble the appliance in ac-
•
cordance with the following steps:
Take off the remover circle. (Fig.1).
•
Remove the outer foil as arrow di-
•
rection. (Fig.2).
Take out the rotative blades and
•
clean the blades shaft with the
brush. (Fig.3).
Clean the container (Fig.5).
•
Reassemble the blades and the
•
outer grill on the appliance follow-
ing the reverse steps.(Fig.6).
Clean the equipment with a damp
•
cloth with a few drops of wash-
ing-up liquid and then dry.
Do not use solvents, or products
•
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
ot include if appliance doesn't have
•
connection to the mains:
Never submerge the appliance in
•
water or any other liquid or place it
under running water.
EN