Cooper Lighting XR Serie Instrucciones Para La Instalación

SURE-LITES
Installation Instructions For XR Series
IMPORTANT SAFEGUARDS
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS
BE OBSERVED INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
2. Do not use outdoors.
3. Do not let power supply cords touch hot surfaces.
4. Do not mount near gas or electric heaters.
5. Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized
personnel.
6. Do not use this equipment for other than its intended purpose.
7. The use of accessory equipment not recommended by Sure-Lites may cause an unsafe condition.
8. Some equipment covered by these instructions are rated for remote heads. This equipment does not require a load fuse because its
sophisticated solid-state transfer switch is current limited. Check load rating of equipment to calculate remote capability. DO NOT
exceed TOTAL OUTPUT RATING of equipment. TRANSFER CIRCUIT will automatically shut down if overloaded.
9. Caution: Halogen cycle lamp(s) may be used in this equipment. To avoid shattering, do not operate lamp in excess of rated voltage.
Protect lamp against abrasion and scratches and against liquids when lamp in operating. Dispose of lamp with care.
10. Halogen cycle lamps operate at high temperatures. Do not store or place flammable materials near lamp.
SAVE THESE INSTRUCTIONS
11.
CAUTION: To avoid possible electrical shock, be sure that power supply is turned off before installing or servicing this unit.
SURE-LITES 1121 Hwy 74 South Peachtree City, Georgia 30269 770-486-4800 Fax 770-486-4801 7/07 049-73C