Wash cycles and options
Table of programmes and wash cycles
Description of the wash cycle
1 Anti Stain
2 Whites
3 Cotton + Prewash: extremely soiled whites.
4 Cotton (1): heavily soiled whites and resistant colours.
5 Cotton (2): lightly soiled resistant colours.
6 Synthetics: heavily soiled resistant colours.
7 Anti allergy
8 Wool: for wool, cashmere, etc.
9 Delicates
Fast Wash 30': to refresh lightly soiled garments
10
quickly (not suitable for wool, silk and clothes which
require washing by hand).
11 Wash&Dry
12 Drying Cottons
13 Drying Synthetics
14 Drying Wool
Rinse
Spin and Pump out
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary
according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options
selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 4 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
Wash options
Eco
The Eco option saves energy by not heating the water
used to wash your laundry – an advantage both to the
environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent
! It cannot be used in conjunction with wash cycles 1, 2, 3,
7, 8, 9, 11, 13, 14,
,
.
By selecting the drying function as well, an automatic
drying cycle automatically activates at the end of the wash
cycle – it too allows for saving energy, thanks to the optimal
combination of air temperature and cycle duration.
! It can be activated with programmes 4 and 5.
Max.
Max.
speed
Drying
temp. (°C)
(rpm)
Prewash Wash Bleach
40°
1400
60°
1400
90°
1400
60°
1400
(Max. 90°)
40°
1400
60°
800
60°
1400
40°
800
30°
0
30°
800
30°
1400
-
-
-
-
-
-
-
1400
-
1400
Delay Timer
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text "OFF"
appears on the display.
! This option can be used in conjunction with all cycles.
Detergents
Fabric
softener
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
GB
Max.
Cycle
load
duration
(kg)
5
5
8
8
8
4
5
2
1
3,5
1
6
4
2
8
8
7