Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The dehydration process
Starting the dehydration process
The drying temperature can be displayed both in Celsius (°C)
and in Fahrenheit (°F).
− Hold the SET button
1. Connect the power plug
The indicator on the display on the control panel
(see Fig. B).
2. Set the desired dehydration time with the plus button
button
10
.
3. Push the SET button to be able to set the temperature.
The °C or °F symbol will illuminate.
4. Set the desired temperature with the plus button and/or the minus button.
5. Start operation by pushing the ON/OFF button
and warm air will flow out of the hot air vent
automatically switch off once the set dehydration time has elapsed.
During the dehydration process
The indicator on the display will alternate every 5 seconds between the
remaining dehydration time and the dehydration temperature.
During the dehydration process, you can change the dehydration temperature
and the dehydration time.
1. Push the SET button
The indicator on the display
2. Change the dehydration time or the drying temperature by pushing the
plus button
3. Wait until the indicator on the display stops blinking to save the setting.
Replacing and turning the drying trays
− To ensure uniform drying, replace and turn the drying trays
during the dehydration process.
Make sure that the drying tray without the opening in the middle is always
in the topmost position.
− As the food on the bottom trays is exposed to the hottest and driest air, move
the bottom trays up and the top trays down.
18
desired mode. The selected mode will appear on the indicator
on the display
4
with a properly installed outlet.
11
when the mode you would like to change is shown.
9
and/or the minus button
11
down for 3 seconds to access the
7
.
7
will start to blink.
10
5
will start to blink
9
and/or the minus
8
. The fan will turn on
6
. The dehydrator will
.
2
occasionally
Publicidad
Capítulos
Tabla de contenido
