Lan Setup; Network Configuration - Cebora ARCO Manual De Instrucciones

Weldments can be exported from a webapp with a PC connected to the power source via a LAN, using the Ethernet
port fitted to each power source. The exported data can be saved in CSV or PDF format, with up to 1000 records per
file.
Export Diagnostic
Exports diagnostic data on errors that have occurred in the welding machine power source to a USB drive The
exported file is in PDF format.
The diagnostic data can also be exported from the webapp as described for Weldments.
Load Dealer Infos
Allows a second power source start-up screen to be customised with the dealer's data and logo. Ask CEBORA
technical assistance for details of the procedure.
9�4�3 LAN setup
The power source is equipped with a 100Mbit Ethernet port with built-in web server that can be connected to a LAN
and therefore communicate with personal computers and other devices connected to the LAN quickly using standard
protocols.
The network card MAC address is shown at the top right of the configuration screen.

Network configuration:

Connect the network cable to the connector on the back of the power source.
The network can be configured in manual or automatic mode.
Manual
Automatic
If network communication is correctly established, a fixed icon appears on the status bar
Connection via browser
Start a browser (e.g. Google Chrome) on a personal computer and enter https://<IP Address> of the power source
in the browser address bar
homepage.
88/107
Select Menu -> Settings -> LAN Setup
Turn B to select the desired field and press B to confirm, then change
the desired values.
Confirm the address using the pushbutton with the checkmark.
Exit the menu by pressing the return pushbutton.
Set the value of each field between 0 and 255 for IP Address and
Netmask.
The Gateway and DNS fields can be left at 0.0.0.0 because they are
currently unused.
Confirm the configuration by pressing the pushbutton with the
checkmark.
If a DHCP server is configured in the network for automatic address
allocation, select the DHCP pushbutton at the top left, then confirm
using the pushbutton with the checkmark.
Use the pushbutton MENU -> Information to check the IP number
currently used in the power source.
(for example:https://192�168�14�157) and press Cebora to open the Cebora webapp
.