Deleting A Job; Copying A Job; Welding With A Job - Cebora ARCO Manual De Instrucciones

9�1�3 Deleting a JOB
9�1�4 Copying a JOB
9�1�5 Welding with a JOB
Set Job Mode and turn encoder B, or the torch UP/DOWN pushbuttons to navigate between saved JOBS.
A JOB can be selected when the machine is in standby or while it is delivering power.
Switching between JOBS with the arc on is NOT allowed between processes:
- TIG -> MMA,
- TIG -> PW
- TIG DC -> TIG DC XP.
Select the JOB memory position, turning encoder B�
Press pushbutton
Select the memory position of the JOB to be copied, turning encoder B�
Press and the JOB will be copied to the memory.
Select a free memory location using B and press
copied to the new position.
Select the memory position of the JOB to be used, turning encoder B�
Press the Job Mode button to activate welding with the selected JOB
The Job Mode operating mode is active with the selected JOB (1 in the
example).
and the JOB will be deleted.
: the JOB will be
81/107