OwnerInformation - Monitor Audio WS-10 Manual Del Usuario

SetUp
Once the input cables are connected, the wireless transmitter and WS-10 are paired, and the controls are set in accordance with
the initial set-up procedure above, the subwoofer can be re-connected to the mains power supply and switched on at the mains
power switch.
Do not play any music or movies at this stage as the auto set up of the AV amp (if using one) will need to be run. If your amp has
an auto set up procedure, run this now.
When the auto set up is complete, check that the subwoofer settings on the AV amp are correct. The level should be no more/ less
than +/- 3dB. If not we would suggest adjusting accordingly and increasing the volume level on the subwoofer.
Now play a variety of familiar music/film excerpts and adjust the level of the subwoofer until you are happy it integrates with the
rest of the system. The volume of the amp can then be adjusted to an average listening level. Once sure everything is working
correctly, double check the subwoofer level settings.
NOTE: It might be necessary to adjust the speaker/ subwoofer settings manually if they are not to your tastes or recommendations
in the speaker/ subwoofer manuals.

OwnerInformation

Product Details
Model: WS-10.
Product Serial No:
Amp Serial Number:
Date of Purchase:
Dealer Details
Dealer Name:
Address:
Town, Post/ Zip Code, Country:
e-mail address:
6 WS-10