Infant Car Seat Installation; S924600 Icsa Peg Perego Primo Viaggio 4.35, Sip & Sip 30/30 - Britax BOB Gear Duallie Manual De Instrucciones

INFANT CAR SEAT
INSTALLATION
S924600 ICSA PEG PEREGO
PRIMO VIAGGIO 4.35,
SIP & SIP 30/30
Failure to properly secure
Restraint Belt and to properly
install Infant Car Seat on Infant
Car Seat Adapter may result
in accident, injury or death.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar, place Restraint Belt
ends to the sides of stroller seat (see
stroller owner's manual if necessary).
2. Align Infant Car Seat
Place Infant Car Seat "rear facing"
directly centered on top of ICSA,
align Groove Feature on Infant Car
Seat with Middle Tube on ICSA.
3. Verify Infant Car Seat is Latched
Properly
Push Infant Car Seat straight down
onto ICSA until the adapters on each
side lock into the receivers on ICSA.
4. Verify Infant Car Seat is
Securely Attached
Pull up to ensure the Infant Car
Seat is secure.
5. Secure Restraint Belt
Proceed to section titled "Securing
Restraint Belt" (pg.14).
12
P637400A