Technical Data; Eu Declaration Of Conformity - Atlas Copco D2112 Manual Del Usario

D2112

Technical data

Product data
Maximum working pressure
Free speed
Declarations

EU DECLARATION OF CONFORMITY

We, Atlas Copco Industrial Technique AB, S-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that the product (with name, type and serial number,
see front page) is in conformity with the following Direc-
tive(s):
2006/42/EC
Harmonised standards applied:
ISO 11148-3
Relevant technical information can be requested by authori-
ties only.
Quality Manager, Atlas Copco Industrial Technique AB,
S-105 23 Stockholm Sweden
Stockholm, 24 April 2017
James McAllister, Managing Director
Signature of issuer
Noise and Vibration Declaration Statement
• Sound pressure level 80 dB(A) , uncertainty 3 dB(A), in
accordance with ISO15744.
• Sound power level <80 dB(A) , uncertainty 3 dB(A), in
accordance with ISO15744.
• Vibration total value <2.5 m/s
dance with ISO28927-5.
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, Atlas Copco Industrial Technique AB, cannot be held
liable for the consequences of using the declared values, in-
stead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
- bar
(- psig)
5400 r/min
( rpm)
2
, uncertainty -, in accor-
© Atlas Copco Industrial Technique AB - 9836 3455 00
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe bodily injury.
Read all safety Information delivered together with
►
the different parts of the system.
Read all product Instructions for installation, opera-
►
tion and maintenance of the different parts of the
system.
Read all locally legislated safety regulations with re-
►
gard to the system and parts thereof.
Save all safety information and instructions for fu-
►
ture reference.
Statement of use
This product is designed for drilling or tapping holes. No
other use permitted. For professional use only.
Product specific instructions
Maintenance and service instructions
The service must only be done by authorized workshops
or qualified service technicians.
Safety Information
http://
and selecting 'Tools' then 'Legis-
3