Storage Drawer; Electrical Connection; Removal Of Gas Appliance - Maytag T2 Guía Del Usario

Care & Cleaning

STORAGE DRAWER

CAUTION:
➢
Do not store plastic, paper prod-
ucts, food or flammable materials in
this drawer. The drawer may be-
come too warm for these items
when the oven is in use.
The storage drawer can be removed to
allow you to clean under the range.
TO REMOVE:
1. Empty drawer and pull out to the first
stop position.
2. Lift up the front of the drawer.
3. Pull out to the second stop position.
4. Grasp sides and lift drawer up and out.
TO REPLACE:
1. Fit the ends of the drawer glides into the
rails in the range.
2. Lift up the front of the drawer and gently
push in to the first stop position.
3. Lift drawer up again and push until
drawer is closed.
17
, cont.
ELECTRICAL
CONNECTION
Appliances which require electrical pow-
er are equipped with a three-
prong grounding plug which
must be plugged directly
into a properly ground-
ed three-hole 120 volt
electrical outlet.
Always disconnect power to appliance be-
fore servicing.
The three-prong grounding plug offers pro-
tection against shock hazards. DO NOT
CUT OR REMOVE THE THIRD GROUND-
ING PRONG FROM THE POWER CORD
PLUG
If an ungrounded, two-hole or other type
electrical outlet is encountered, it is the
personal responsibility of the appliance
owner to have the outlet replaced with a
properly grounded three-hole electrical
outlet.
REMOVAL OF GAS
APPLIANCE
Gas appliance connectors used to connect
this appliance to the gas supply are not de-
signed for continuous movement. Once in-
stalled, DO NOT repeatedly move this gas
appliance for cleaning or to relocate. If this
appliance has to be moved and/or removed
for servicing, follow the procedure
described in the installation instructions. For
information, contact Maytag Customer
Service at 1-800-688-9900.
To prevent range from accidentally tipping,
range must be secured to the floor by slid-
ing rear leveling leg into the anti-tip bracket.