Scale Function Keys - Mettler Toledo IND930 Guia De Inicio Rapido

1.5.

Scale Function Keys

The four scale function keys are on the touchscreen. They can be configured for
specifically for each operator, via the softkey setup menu.
Softkey / key
4 METTLER TOLEDO IND930 Quick Guide CEU
Scale – If several scales are connected to the terminal, this button allows users
to change between scales, including the sum scale if one is configured.
or
Zero – If the scale platform or the weighing platform is empty, the terminal
should display zero. The gross zero reference is recorded during the calibration.
Pressing the Zero key enters a new gross zero reference point if the weight is
or
within the zero range.
Tare – Tare is the weight of an empty container. Tare is generally used to
determine the net weight of the content of a container. The Tare key is pressed if
an empty container is on the scale. The terminal acquires the tare value and
or
displays zero as the net weight. The weight display shows NET and a small box
is shown at the top right of the display in which the tare value and the tare unit
are displayed. When the container is loaded, the terminal shows the net weight
of the content.
To delete the tare value, press the
Tare Preset – If the weight of the empty container is known, the tare value is
directly entered via the Tare Default key. The terminal then displays the net
weight of the container content.
or
To delete the tare value, press the Clear
Scale function keys
Explanation
key.
key.
30515558 | 00 | 01/2019