Metra 99-5826CH Instrucciones De Instalación página 6

(3) Color button:
• Pressing this button will take
you to the skin color menu.
Once in this menu you will
be able to choose from (12)
different skins. Once you have
selected your new skin simply
touch the home button for
changes to take effect.
1. Ice Blue
2. Soft Blue
3. Blue
4. Red
5. Green
6. Orange
7. Purple
8. Pink
9. White
10. Water
11. Fire
12. Default
Touch Screen
Tools Screens
(4) Trigger button:
• Pressing this button will take
you to the Trigger switch
screen. These features are
optional for the 99-5826CH
and are not required for the
kit to work. Here you will be
able to turn on and off lines
1 through 3 (all outputs are
500mA negitive trigger latched).
Wiring:
1. Yellow wire – Connect to 12-volt accessory power
2. Purple wire (line 1) – Connect to a negative input on a relay
3. Brown wire (line 2) – Connect to a negative input on a relay
4. Green wire (line 3) – Connect to a negative input on a relay
Note: Included 4-pin harness must be connected to the rear of the touch screen.
Use Metra part number E-123 relay for each line needed.
6
Continued on next page