Iso Din Head Unit Provision - Metra 99-5812 Instrucciones De Instalación

ISO DIN HEAD UNIT PROVISION

NOTE: Refer also to the instructions included with the aftermarket radio.
(a) For the Ford/Edge Expedition
1
2007, Explorer 2006-07, Fusion
2006-07, Mustang 2007 and the
Super Duty 2008 attach the included
spacers to the back of the radio hous-
ing mounting tabs.
NOTE: Use the screws supplied with this kit
to mount the radio housing in the vehicles
that require the spacers.
(b) For the Ford Freestar 2004-07,
Monterey 2004-07, Focus 2005-07,
and the F Series Super Duty 2005-
07, slide the included brackets onto
the sides of the radio housings pocket
from the back of the housing forward.
(Figure 1B)
If your vehicle is not listed above
move to step 2.
2 Mount the ISO Brackets to the head
unit with the screws supplied with the
(Figure A)
unit.
3
Slide the head unit into the radio open-
ing until the side clips engage
(Figure B)
4 Snap the Trim plate into the Radio
(Figure B)
Housing.
99-5812
(Figure 1A)
14
KIT ASSEMBLY
1A
1B
A
B