Procedure For Connecting To A Macintosh Wireless Network - HP LaserJet 1320nw Manual Del Usario

Procedure for connecting to a Macintosh wireless network

NOTE This installation method is for Macintosh users.
1. Start the Macintosh in OSX 10.2 or higher (not supported in v10.1).
2. Plug the power cord into the printer and then plug the cord into the power outlet.
3. Turn the printer on.
4. Insert the CD into a computer that is linked to the network. Drag-and-drop the HP WPS
5. Open the System Preferences Network settings panel and create a custom Location
6. Select Show and then Network Port Configurations. Deselect Internal Modem and
22 Chapter 2 Setting up the printer
Assistant X (ver. 2.1) from the CD to the computer desktop. If the computer is not set up
as wireless, go to Step 5. If the computer is set up as wireless, go to Step 9.
setting. Type a name for the network (for example, MyHomeNetwork).
Built-In Ethernet. Click Apply Now.
ENWW