Procedure For A Windows Infrastructure Network Installation - HP LaserJet 1320nw Manual Del Usario

Procedure for a Windows infrastructure network installation

If you experience problems during the wireless installation process, see the Problem
NOTE
solving section of the HP LaserJet 1320nw printer Wireless User Guide.
1. Plug the power cord into the printer and then plug the cord into the power outlet.
2. Connect the cable from the HP Jetdirect network port on the printer to the network hub/
18 Chapter 2 Setting up the printer
router. This cable connection is temporary. At the end of the installation process, you will
disconnect the cable. The printer will then operate wirelessly. (Use the cable that is
packaged with the printer.)
ENWW