Important Safety Instructions - Thermador DM301 Instrucciones De Instalación

Ocultar thumbs Ver también para DM301:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Instructions

Important Safety Instructions .........................................................................................................1
Preparation .....................................................................................................................................2
Connect Electric .............................................................................................................................5
Final Steps .....................................................................................................................................6
Please read all instructions before using this appliance.
If the information in this manual is not followed exactly, a fire or explosion may result
PARTS NEEDED:
Tape Measure
Straight Edge or Ruler
Phillips Head Screwdriver
Level
Pencil
Wire Cutters or Wire Stripper
Conduit Box
Wire Nuts
Volt Meter (0-250 VAC)
1" Hole Saw
Hand or Saber Saw
Drill and Drill Bit
Safety Gloves and Goggles
Cloth or cardboard (Optional - to Protect Floor)
WARNING
Before installing, turn power OFF at the service
panel. Lock service panel to prevent power from
being turned ON accidentally.
CAUTION
Do not use the oven for storage.
Unit is heavy and requires at least two people or
proper equipment to move.
Table of Contents
WARNING
causing property damage, personal injury or death.
Remove all tape and packaging before using the
oven. Destroy the packaging after unpacking the
oven. Never allow children to play with packaging
material.
Be sure your appliance is properly installed and
grounded by a qualified technician in accordance
with the National Electrical Code ANSI/NFPA No. 7
latest edition (or the Canadian Electric Code) and
local electrical code requirements.
Important: Local codes vary. Installation, electrical
connections and grounding must comply with all
applicable codes.
Install only per installation instructions provided
in the literature package for this oven.
Ask your dealer to recommend a qualified
technician and an authorized repair service.
Know how to disconnect the power to the oven
at the circuit breaker or fuse box in case of an
emergency.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manuals. All other servicing should be done by
a qualified technician. This may reduce the risk of
personal injury and damage to the oven.
Never modify or alter the construction of an
oven by removing panels, wire covers, screws, or
any other part of the product.
DO NOT LIFT OVEN BY DOOR HANDLE. Remove
the door for easier handling and installation. See
"Removing the Oven Door" in the Maintenance
section of the Use and Care Manual.
English • 

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dm302

Tabla de contenido