KTM Power Parts 60312935044 Manual Del Usuario página 6

17
18
16
17
6
20
8
19
8
- Bond the reed switch with the cable (16) as shown (self-adhesive) and secure
it to the rear frame with the sheet metal screws (8).
- Connect the connector (17) with the reed switch connector (18).
NOTE:
The plug (17) is located below the right-hand side cover beside the subframe.
- Bond the reed switch without the cable (19) as shown (self-adhesive) and
attach it to the seat (20) with the sheet metal screws (8).
Final steps
- Mount the seat (see Owner's Manual) and perform a functional check (see
the alarm system manual).