Aux-In Connection - lauson CL145 Manual De Instrucciones

STEREO PHONOGRAPH OPERATION
PLEASE NOTE – BEFORE USE
- Remove the stylus protector.
Make sure that the tone arm is unlocked and free to move from
-
the tone arm rest prior to operating. Lock the tone arm again
when not in use.
1. Slide the Power On/Off switch (6) to On position
2. Raise the turntable dust cover.
3. Place the record on the platter (use the 45 RPM record adaptor (11) if you are
playing 45 RPM records).
4. Set the speed selector (12) to the proper position for the record you are
playing.
5. Lift the tone arm from the rest (13) and slowly move it over the record. The
platter will begin spinning.
6. Place the tone arm down onto the record in the location that you want to play.
7. Adjust the volume (9) to the desired level.
8. At the end of record, the platter will automatically stop spinning. Lift the tone arm from the record and
return it to the rest.
9. To stop playing manually, lift the tone arm from the record and return it to the rest.
NOTE:
Some types of records may have an auto-stop area outside the preset limit, so the turntable may
stop before the last track finishes. In this case, set the AUTO-STOP switch (7) to the "OFF" position. This
allows the record to play to the end, but please note that it will not stop automatically. You must manually
raise the tone arm and place it back in the rest and then turn off the power to stop the turntable from
spinning.
REMARK : Due to Aux and Phono were designed at the same channel of this system. When Aux in jack
(15) plugged by 3.5mm stereo plug. The channel will change to Aux automatically and turntable will stop to
rotate. Please ensure the Aux in jack (15) without plugged by anything before playing Phono.
ANOTHER ADJUSTMENT
You can adjust the tone sound by Tone control (10) or pitch by Pitch Adjust (3) for different music
enjoyment.

AUX-IN CONNECTION

Connect the unit to other device by connecting the Aux in jack (15) with a 3.5mm cable(not provided) and
other end connect to the external device such as Discman/MP3 player to perform the music playback or
encoding function etc.
1. Slide the Power On/Off switch (6) to On position
2. Volume Control Knob,(9) to desired volume level.
3. Start to play your external device.
LINE OUT CONNECTION
You can connect this unit to your external Hi-Fi / AMPLIFIER system by connecting the LINE OUT socket
(14) to the auxiliary input socket of your Hi-Fi / AMPLIFIER system.
with a RCA cable (not included).
Note: The Volume control will not function when using the LINE OUT.
OPERATIONS
3