Setting Convection Auto Conversion; (Model Lrel6325** / Lrel6323**); Adjusting The Oven Temperature - LG LREL6325 Serie Manual Del Usuario

22 OPERATION

Setting Convection Auto Conversion

(Model LREL6325** / LREL6323**)

When using convection bake, the convection auto
conversion feature will automatically convert entered
regular baking temperatures to convection baking
temperatures. When this feature is enabled, the display
will show the actual converted temperature.
For example, if you enter a regular recipe temperature
of 350°F and press the START button, the display will
show the converted temperature of 325˚F.
Model LREL6325**
1
Press Settings repeatedly until Auto appears in
the display.
2
Press 1 to switch Auto Conversion on or off.
3
Press Start to accept the change.
Model LREL6323**
1
Press and hold the Start Time button for 3
seconds.
2
Press Start Time repeatedly until Auto appears
in the display.
3
Press +/– button to switch Auto Conversion on
or off.

Adjusting the Oven Temperature

Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too
cold, you can adjust the oven temperature yourself.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
Model LREL6325**
1
Press Settings repeatedly until AdJU appears in
the display.
2
Use the number keys to enter the number of
degrees you want to adjust the oven temperature.
Press Settings again to add a minus sign if
decreasing the temperature.
3
Press Start to accept the change.
Model LREL6323** / LREL6321**
1
Model LREL6323**
Press and hold the Start Time button for 3
seconds. Press Start Time repeatedly until
AdJU appears in the display.
Model LREL6321**
Press Settings repeatedly until AdJU appears in
the display.
2
Set the number of degrees to adjust:
Press or press and hold the +/– buttons until
the desired number of degrees appears in the
display.
Press Settings again to add a minus sign if
decreasing the temperature.
3
Press Start to accept the change.
NOTE
• This adjustment does not affect the Broil or
Self Clean temperatures on models with these
features. The adjustment is retained in memory
after a power failure.
• The oven temperature can be increased or
decreased by a maximum of 35°F (19°C).
• Once the temperature is increased or
decreased, the adjustment shows in the AdJU
setting display until it is reset.