Sony DSX-GS80 Manual De Instrucciones página 16

Notes
• When mounting on the dashboard, remove the
visor clip carefully from the microphone , then
attach the flat-mount base  to the microphone
.
• Before attaching the double-sided tape  clean
the surface of the dashboard with a dry cloth.
Using the wired remote control
1
To enable the wired remote control,
set [STRG CONTROL] in [STEERING] to
[PRESET].
Installation
Removing the trim ring and the
mounting sleeve
Before installing the unit, remove the trim
ring  and the mounting sleeve  from the
unit.
1 Pinch both edges of the trim ring ,
then pull it out.

2
Insert both release keys  until they
click, and pull down the mounting
sleeve , then pull up the unit to
separate.


Face the hook inwards.
16
GB
Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the mounting sleeve  are
bent inwards 2 mm (
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The
heatsink on the left side of the unit
remains hot right after use.
1
Position the mounting sleeve 
inside the dashboard, then bend the
claws outward for a tight fit.
53 mm (2

2
Mount the unit onto the mounting
sleeve , then attach the trim ring
.

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the trim ring  are
properly engaged in the slots of the unit.
3 / in).
32
182 mm (7 1 /
4
1
/ in)
8
Catch



in)