Installation And Mounting; Selecting The Mounting Location - SICK UE3212 Instrucciones De Servicio

Tabla de contenido

Idiomas disponibles

Chapter 4

Installation and mounting

This chapter describes the preparation and completion of the installation of the safe bus

node UE3212. The installation and mounting requires the following steps:

the selection of a suitable mounting location (cf. chapter 4.1 "Selecting the mounting

location")

mounting on a suitable base (cf. chapter 9.2 "Accessories")

4.1

The safe bus node UE3212 is a decentral component. Select a suitable mounting location

on the basis of the following criteria:

mounting position in the immediate vicinity of the hazardous point to be protected

short cable paths to the components to be connected

flat mounting surface to enable the housing to be mounted without becoming distorted

device's LEDs can be inspected, simple device exchange

protected in order to prevent any removal or breakage of the connecting wires by

personnel or equipment

sufficient space for the plug connections

with respect to vibrational and impact load, temperature and humidity, suitable in

accordance with the data in chapter 8 "Technical specifications".

Operating instructions

UE3212

8010726/TF84/2010-07-20

Subject to change without notice

Tabla de Contenido

Tabla de contenido