Cyclic Testing - SICK UE3212 Instrucciones De Servicio

GB
Chapter 6
96
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Commissioning
6.5

Cyclic testing

The safe bus node UE3212 must be cyclically tested. In order to reach the SIL2 safety
level (see chapter 8 "Technical specifications" on page 98) in accordance with IEC 62 061,
the following test must be performed at least every 365 days:
The safe bus node UE3212 must be powered down.
The safe bus node UE3212 must be powered up.
All safety functions of the connected sensors must be verified.
Operating instructions
UE3212
8010726/TF84/2010-07-20
Subject to change without notice