Troubleshooting - Hozelock 4204 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Thank you for choosing a Hozelock Exel quality sprayer,

you can be assured of many years of reliable service from

this product.

Instructions & Warnings

This apparatus is exclusively designed for the application of

GARDEN PHYTOSANITARY products, BIOLOGICAL CONTROL

products and for the application of the FORMULAE presented

or proposed by the manufacturer in the formulae booklet

accompanying this product, or on the manufacturer's website.

The quantities of each ingredient in the FORMULAE must be

strictly respected. Comply with the instructions for use provided

by the manufacturer of these solutions. You MUST consult the

manufacturer for any other application.

IMPORTANT: This apparatus must not contain or be used

to spray chlorine, solvents, of acetone-based or acid-based

products (except product used in the recipes booklet

accompanying this product). Nor should it be used for the

application of bleach or disinfectants.

Spray compatible with vinegar-based products authorised

for sale on the Swedish market such as Kraft Attika - List

available at www.kemi.se.

• Check that the apparatus operates correctly by checking

there are no leaks with several litres of water in the reservoir.

• The apparatus must not be used or stored at temperatures

under 5°C or over 40°C, neither during the winter or during the

rest of the year.

• The solution to be sprayed must not exceed 25°C.

• Only use in calm weather (no wind).

• Do not use explosive, acidic, and/or corrosive products in the

sprayer.

• Do not spray in the direction of flames or other heat sources.

• Wear protective clothing, protective gloves, protective goggles

and a protective mask.

• Do not smoke, eat or drink during use.

• Do not spray in the direction of other people or pets.

• Keep other people and pets at a reasonable distance from the

apparatus when spraying.

• Help protect the environment, only spray surfaces to be

treated.

• Never remove a part of the sprayer without having previously

released the pressure.

• This apparatus must not be used by individuals suffering from

fatigue or illness, or by any person under the influence of

alcohol, drugs or other medication.

• In order to prevent all risks of plug formation, the spray

solution must be prepared in a separate container, before

using the filter provided to fill the sprayer.

Notes

• Before carrying out any maintenance on this sprayer it is

essential to depressurise the bottle.

• New filter bag to washed with clean water before first

use.

This sprayer is made from many different types of plastic,

and although the liquid you wish to spray may be packed

in plastic, this does not guarantee it will not damage the

sprayer.

When filling the sprayer ensure that the maximum fill

level is not exceeded.

Ensure that the pump is screwed into the bottle tightly.

If the sprayer has been used with chemicals, discard

safely any unused solution after use.

Fill sprayer with warm water (not hot), re-assemble the

sprayer and spray some of the contents. Repeat, and

check that the nozzle is free from sediment. If necessary

repeat the process until the sprayer is clean. NB : Do not

use detergent.

The pump 'O'-ring should be lubricated to allow the

sprayer to pump air efficiently. Apply silicone grease

regularly, to the pump 'O'-Ring (A).

The nozzle cap & swirl grooves (B) should be kept clean

and free of obstruction. The 'O'-ring should be lubricated

to allow the spray pattern to be easily changed. Apply

silicone grease regularly, to the nozzle 'O'-Ring (C).

Keep the trigger clean and free from build up of sediment

and chemicals by regularly flushing after use.

Maintenance

• Winter use – drain liquid from all parts and prevent damage

from freezing.

• Annual maintenance – at least once per year, thoroughly

clean the whole sprayer and apply silicone grease to all

moving parts & seals. Test with water, and if any washer or

seal has perished it must be replaced.

• Always use eye protection when replacing valves, seals or

springs.