Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CYCLE MODiFiER
BUTTONS
Each cycle has default
settings that are selected
automatically.
You may also customize
these settings
using the cycle modifier
buttons. Press the button for the
desired modifier
until the indicator
light for the desired
value is lit. The washer automatically
adjusts the water
level for the type and size of wash toad for best results
and maximum
emciency.
Due to the high-efficiency
nature of this product, water levels may be much lower
than expected.
This is normal operation
and cleaning/
rinsing performance
will not be compromised.
NOTE: To protect your garments, not every wash tem-
perature, spin speed, soil level, or option is available
with every cycle. A chime will sound and the LED will
not light if a selection is not allowed.
O
WASH TEMP
Wash Temp selects the wash and rinse temperature
combination
for the selected cycle. Press the Wash
Temp button until the indicator
light for the desired
setting is lit.
° Your washer
features
a heating
element
to boost
the hot
water temperature for Extra Hot settings. This provides
improved wash performance at normal water heater
settings.
° Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
° Warm rinses are regulated at approximately 86°F
(30°C).
° Warm
rinses leave
the clothes
dryer
than
cold
rinses_ but
will
result
in increased
energy
consumption
and
greater
wrinkling of clothes.
° Cold rinses use Jessenergy. The actual rinse temperature
depends
on the temperature
of the cold
water at
the
faucet.
O
SPIN SPEED
O
O
2O
Higher spin speeds extract more water from clothes,
reducing drying time and saving energy.
Press the SPIN SPEED button until the desired speed
is selected. Some fabrics, such as delicates, require
a slower spin speed. To protect your clothing,
not all
spin speeds are available
for all cycles.
The Drain & Spln cycle:
1. Press the POWER button to turn ON the washer.
2. Press the SPIN SPEED button to select the desired
spin speed. For drain only, select the NO SPIN
option.
3. Press the START/PAUSE button. The water will
drain and the clothes will tumble before the spin
routine begins.
SOIL LEVEL
Adjusting
the soil level setting will modify
the cycle
to allow more time for heavily soiled clothes or less
time for lightly soiled clothes. Press the SOIL LEVEL
button until the desired soil level is selected.
CHIME
Press repeatedly
to adjust the votume of the chime
and keypad tones. You may turn the end-of-cycle
chime and keypad tones ON or OFF with the CHIME
button.
Publicidad
Tabla de contenido
