Kenmore 796.4118#31 Serie Manual De Uso Y Cuidado página 26

MAINTENANCE (continued)
C leaning the Drain Pump Filter
Your Washer is equipped with a fitter that helps prevent
excess lint and foreign objects like buttons, keys, and
coins from causing damage to the pump. if the washer
fails to drain properly, unplug the washer and allow the
water to coot, if necessary, before proceeding.
Open the drain pump filter access panel.
f
Plug
O Remove the plug from the drain hose, and allow the
water to drain completely.
NOTE: If there is a large amount of water in the drum,
you may have to empty your container several times.
J
Drain Hose
Unclip the drain hose and pull it out. Place the end of
the drain hose into a shallow pan or a floor drain. Make
sure not to pull the hose out too far, or it may not drain
properly.
Pump
O Twist the pump filter counterclockwise to remove.
Remove any lint and foreign objects from the pump flJten
Insert pump filter back into opening and twist clockwise
to secure. Be sure to close the drain pump filter access
panei.
26