Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NORMAL
SOUNDS
YOU MAY HEAR
The following
sounds may be heard while the washer is
operating.
They are normal.
Clicklng:
Door locking mechanism clicks when the door locks and
unlocks.
Humming or gurgling:
Drain pump is pumping
water from the washer at times
during a cycle.
Spraying or hissing:
Water spraying or circulating
during the cycle.
Splashlng:
Clothes tumbling
in the drum during the wash and rinse
cycles.
BEFORE CALLING
FOR SERVICE
if your washer does not function
properly
or does not function at all, check the following
before you call for service.
i!iiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiii!iiiii!ii!
_iiiiiiiii iii!il iii!iiiiiiiiiiiiiili!ii!iiiiiiiiiiiii!ii!i_!:
_!_!_ii!_i
!!!il!i!!iiiiii!!!i;i;_;
iiiiiii!ili _i]_!_!_i!_!ii!ii!!_iiiiiiii!!!!!!!!!!!!!!!!!!!!!!!ii_i!i!!iiiii!_i!i_iiii_iiiiii!_i_ii_iiiiiiiiiiiii_ii_iiiiiiiiiiiiiiii!!_iiiiiiiiiiiii_ii_iiiiiiiii!!_i
Rattllng
and clank=
Foreign objects, such as keys, coins, or safety pins,
Stop washer, check drum and drain filter for foreign
ing noise
may be in drum or pump.
objects, if noise continues after washer is restarted,
call for service.
Thumping sound
Vibrating
noise
Water leaklng
around washer
Heavy wash loads may produce a
thumping
sound.
Washer load may be out of balance.
Washing shoes or tightly tangled
clothes.
Shipping bolts and/or packaging materials were
not removed.
Wash load may be unevenly distributed in the
drum.
Not all leveling feet are resting firmly and evenly
on the floor.
Floor not rigid enough.
Inlet hose connection
is loose at tap
or washer.
House drain pipes are clogged.
Drain hose has come out of drain.
Drain hose is not inserted far enough.
Door glass is dirty.
Too much
detergent
or incorrect
detergent.
Excessive sudsing
This is normal, if sound continues, washer is
probably
out of balance. Stop and redistribute
wash load.
Pause the cycle and redistribute
the load after
the door unlocks.
See the UNPACKING AND REMOVING SHIP-
PiNG BOLTSsection in the installation requirements.
Pausethe cycle and redistribute the load after the
door unlocks.
See Levelingthe Washer in the Installation Instruc-
tions.
Make sure that the floor is solid and does not flex.
See
Flooring in the installation Requirements.
Check hoses. Check and tighten hose
connections.
Unclog drain pipe. Contact a plumber if
necessary.
Tie drain hose to inlet hose or standpipe
to
prevent it from coming out during drain. It
should be inserted about 8-12 inches into the
standpipe.
Inspect door glass periodically
to make sure
there is no buildup of residue or other foreign
matter. Follow cleaning
instructions.
ijl_
Only use detergent
with the High-
Efficiency
(HE) logo. See Detergent
Use in
the How to Use section.
28
Publicidad
Tabla de contenido
