Service Information - Black and Decker PIUSB Manual De Instrucciones

from a single outlet.
Connecting another device to
the second outlet in this case
will cause the charger
to shut down.
Chager in thermal Allow charger to cool down
shutdown condition Ensure there is adequate
ventilation around the unit,
and the load is no
more than 5 watts for
continuous operation.
Replacing the fuse in the DC plug.
• Remove the cap by turning it counter clockwise.
• Remove the cap and pin.
• Remove the fuse.
• Fit a new fuse of the same type and size (1.6A)
• Refit the cap and pin.
• Tighten the cap by turning clockwise onto the plug.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel
to provide customers with efficient and reliable power tool service.
18