Dvd Player; Multichannel Receiver - Sanyo DP50747 El Manual Del Propietario

VIDEO 2 & 3 COMPONENT: GREEN,
BLUE, RED— An Exceptional Picture
CONNECTING A STB, DVD, OR GAME
1 Connect a Component Cable to the VIDEO 2 / 3
Green, Blue, and Red video jacks.
2 Connect an Audio Cable to the VIDEO 2 / 3
White and Red audio jacks.
3 Press INPUT to select Video 2 or Video 3 to
view the program.
Note: VIDEO 2 and VIDEO 3 jacks have identical
functions. Compatible video devices can be
connected to either or both jacks.
DVD PLAYER / GAME SYSTEM CONNECTED TO
VIDEO 2 / VIDEO 3 JACKS
2
AUDIO L/R
JACKS
2
AUDIO L/R
JACKS
8
Need help?
Visit our Web site at
(Y-green Pb-blue Pr-red)
SET-TOP BOX, DVD PLAYER
or similar device
1
GREEN, BLUE, RED JACKS
BACK VIEW
OF DTV
(VIDEO 3)
GAME SYSTEM
1
GREEN, BLUE,
RED JACKS
BACK VIEW
OF DTV
(VIDEO 2)
REMOTE CONTROL
3
www.sanyoctv.com
DIGITAL AUDIO JACK
CONNECTING A MULTICHANNEL RECEIVER
TO THE DTV
1 Connect a Multichannel Receiver to the DTV
Digital Audio Output as shown.
®
Note: Dolby Digital 5.1 audio is available at the Digital
Audio Output only when received as part of a
Digital Antenna signal being viewed on the
screen.
MULTICHANNEL RECEIVER CONNECTED TO
DIGITAL AUDIO OUT JACK

MULTICHANNEL RECEIVER

BACK VIEW OF DTV
IMPORTANT FACT: To view available High-Definition
(HD) programs, you must connect your HD equipment
to the Component or HDMI jacks.
OPERATING TIPS:
I
Press the INPUT key after connecting cables to
access the AV Inputs. There is NO need to tune
to a blank channel.
I
You DO NOT need to tune the DTV to Channel 3
or 4 to view a DVD program.
1-800-877-5032
or Call
PHONO-TYPE
DIGITAL AUDIO
OUT CABLE
1
(Not supplied)