Master Forge RT2417S Manual Del Usuario página 18

NATURAl gAS CONVERSION INSTRUCTIONS
18. Remove the LP orifices first with the orifice
removal tool, then install the NG orifice. Make
sure you are using the correct orifice, marked
"1.37".
When this step completed, install the main
burners back to the firebox and secure to the
bracket with the R-pins.
Make sure the orifices are aligned with the
burners and the ignition pins are installed
in their original positions. Check the sparks
before operating the grill.
Change to 10 ft. NG hose
19. Take the regulator off from the manifold and
replace it with 10-ft. natural gas hose. Please
make sure the hose is securely fastened.
Adjust valve control screw
20. Pull all the knobs off from valve stems. Adjust
the screw in the valve hole using the flathead
screwdriver. Turn screws two complete turns
counterclockwise.
21. To complete conversion, re-install all knobs,
return heat diffusers to firebox, followed by the
grates and warming rack.
18
19
20
Valve hole
18
1.37
Lowes.com/masterforge