Setting The Clock; Minute Timer - Kenmore 790.90102 Manual De Uso Y Cuidado

Setting the
Clock
FEATURE OVERVIEW
• Clock

• Minute Timer

Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
INSTRUCTIONS
To Set the Clock: (example 1:30)
1. Push CLOCK.The timer allows you 5 seconds to go to step 2.
2. Push and hold the UP or DOWN ARROW to set the time of day to
1:30. You may also push CANCEL.
Note: The time cannot be changed during any timed bake or self-clean cycle.
Minute Timer
To Set the Minute Timer
1. Push TIMER ON/OFF.
2. Push the UP ARROW to increase the time in one minute increments. Push
and hold the UP ARROW to increase the time in 10 minute increments.
The timer can be set for any amount of time from 1 minute to 11 hours
and 59 minutes.
Note: If you push the DOWN ARROW first, the timer will advance to 11
hours and 59 minutes.
3. The display shows the timer count down in minutes until one minute
remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will then
continue to beep 3 times every 60 seconds until TIMER ON/OFF is pushed.
Note: The minute timer does not start or stop cooking. It serves as an extra timer
in the kitchen that will beep when the set time has run out. The minute timer can
be used alone or during any of the other oven functions. When the minute timer
is in use with any other mode, it will be shown in the display. To view other
functions, push the function pad for that mode.
To Change the Minute Timer while it is in use:
Push and hold the UP or DOWN ARROW to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out:
Push TIMER ON/OFF.
INSTRUCTIONS
11
DISPLAY
DISPLAY