GYS GYSDUCTION AUTO Manual Del Usuario página 15

Ocultar thumbs Ver también para GYSDUCTION AUTO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Translation of the original instructions
Risk of metal or adhesive projections
• Wear approved protective goggles with lateral protections, or
protect the whole face with a screen.
• Wear protective clothes.
• Wear gloves.
Do not obstruct the machine's air intake, which facilitates air circu-
lation. Check the installation chapter before using the device.
Connection:
• This machine must be connected to an earthed socket.
• These Class A devices are not intended to be used on a residen-
tial site where the electric current is supplied by the public
network, with a low voltage power supply. There may be poten-
tial difficulties in ensuring electromagnetic compatibility on these
sites, because of the interferences, as well as radio frequencies.
• This hardware is compliant with the IEC 61000-3-12.
• This equipment complies with the IEC 61000-3-11.
Maintenance:
• If the power cable is damaged, it must be replaced by the ma-
nufacturer, its after sales service or an equally qualified person
to prevent danger.
• Warning! Always disconnect from the mains before perfor-
ming maintenance on the device.
• High Voltage and Currents inside the machine.
• Remove the casing on a regular basis, to remove any excess
dust. Take this opportunity to have the electrical connections
checked by a qualified person, with an insulated tool.
• Do not use solvents or any agressive cleaning products.
Regulations:
• Device complies with europeans directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community).
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on our
website (see cover page).
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.
• The product's manufacturer contributes to the recycling of its
packaging by contributing to a global recycling system.
•This product should be recycled appropriately.
GYSDUCTION AUTO
EN
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

048775

Tabla de contenido