Faucet Installation - Kohler K-7779 Guia De Instalacion

Spout
Retaining
Collar
Escutcheon
Shank
Bottom Nut
Top Washer
Bottom
Top Nut
Washer
Sleeve
Supply Tee

1. Faucet Installation

CAUTION: Risk of product damage. To prevent scratching, do
not allow the retaining collar to slide up on the spout neck
during installation.
Remove the retaining collar and spout from the shank.
Remove the escutcheon.
Thread the bottom nut down tightly against the washer and
sleeve.
Loosely thread the top nut down to rest against the bottom nut.
Slide the top washer down.
Insert the shank from the bottom of the sink.
Slide the escutcheon over the shank.
Thread down until hand tight.
Tighten the nut and washer to secure the shank to the sink.
Attach the spout to the shank.
Thread down and tighten the retaining collar.
Slide the top washer on the shank up to the underside of the
deck or fixture.
Thread the top nut up against the washer until tight.
Kohler Co.
Shank
Escutcheon
Spout
Top Nut
Top Washer
Bottom
Washer
Supply Tee
3
Top
Washer
Top Nut
Bottom
Nut
Sleeve
117127-2-AB