Fuse Replacement; Infrared Remote Control); Mounting Diagram - Chauvet DJ 6Spot Quad IRC Guía De Referencia Rápida

6SPOT™ Quad IRC QRG

Fuse Replacement

IRC-6 (Infrared
Remote Control)
Mounting
Mounting
Diagram
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The 6SPOT™ Quad IRC can be operated with the IRC-6 from Chauvet. For
more information about the IRC-6, download instructions for the IRC-6 or the
6SPOT™ Quad IRC User Manual from
manuals-literature/.
Before mounting this product, read the
points and one safety per product. Make sure the mounting clamps are capable of
supporting the weight of the product. For Chauvet's line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html.
Safety Cable
(such as CH-05 from
Safety
Chauvet)
Mounting Clamp
(such as the CLP-15N
clamp from Chauvet)
M12 Threaded
Holes
Tripod or
Speaker Stand
Insertion Point
4
www.chauvetlighting.com/product-
Notes. Use at least two mounting
EN