Technical Specifications - Festo CPX-CP-4-FB Manual Del Usuario

4

Technical specifications

Type
General technical specifications
Protection class as per DIN 60529
CPX−CP interface fitted completely, plugs
in protection class IP65/IP67 inserted, un
used connection fitted with protective cap
Protection against electric shock
(Protection from direct and indirect
contact as per EN 60204−1 /IEC 204)
Load voltage supply for valves (V
Current consumption CPX−CP interface
(only CPX−CP interface, without CP
modules)
From operating voltage supply for
electronics/sensors (V
From load voltage supply for valves
(V )
val
Max. current consumption per CP string
From operating voltage supply for
electronics/sensors (V
From load voltage supply for valves
(V )
val
Electrical isolation
Between the operating voltage supply
for the electronics/sensors (V
and the load voltage supply for the
valves (V )
val
Festo CPX−CP−4−FB xxxxNH English
)
val
)
el/sen
)
el/sen
)
el/sen
CPX−CP−4−FB
See CPX system manual
P.BE−CPX−SYS−...
IP65/IP67
By means of PELV power
units (Protected Extra−Low
Voltage)
Tolerance 20.4 ... 26.4 V
typ. 75 mA at 24 V
typ. 5 mA at 24 V
1.6 A at 24 V
1.6 A at 24 V
None
17