Festo CPX-CP-4-FB Manual Del Usuario página 14

3.2 Connecting the CP modules
Please note
Malfunction due to improper cabling
S For connecting the CP modules to the CP string, use
the special CP cable from Festo (type KVI−CP−..., see
manual for the CPX−CP interface).
S Please note that the total length of cable on a string
must not exceed 10 m.
You will thereby avoid:
Faults in data exchange between the CPX−CP inter
face and the connected CP modules.
CP modules can be connected to any CP connection
according to the rules described in the manual for the
CPX−CP interface:
1. Check which address range is intended for the CP
module.
2. Connect the CP modules with the CP cables to the
string which provides this address range.
3. Fasten the plug and socket of the CP cable with the
union nut. In this way the electrical contact is
guaranteed.
4. Use the identification labels (type IBS 6x10 or
IBS 9x20) to indicate the string to which the module is
connected.
14 Festo CPX−CP−4−FB xxxxNH English