Choosing The Right Cookware; How To Use; Start Cooking - EAS ELECTRIC EMCH295-3F Manual Del Usario

Ocultar thumbs Ver también para EMCH295-3F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.2 Choosing the right Cookware

Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as
the cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

3.3 How to use

3.3.1 Start cooking

After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that
the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF control. all the indicators show "-"
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Select a heat setting by touching the "-" or "+" control.
• If you don't choose a heat setting within 1 minute,
the ceramic hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value will
adjust up or down.
9
V.1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido