Elapsed Time Ring - Timex W223 Manual De Usario

ENGLISH
3) PRESS pusher "B" again to resume timing. The
hands move quickly to indicate elapsed time and
continue counting.
4) PRESS pusher "A" to stop
5) PRESS pusher "B" to reset
EXAMPLE OF SPLIT TIME:
Two runners are timed simultaneously; the first run-
ner's time can be recorded while the second runner's
time will continue to accumulate until he finishes.
NOTE: The hour, minute and second hands on the
watch will continue to indicate the correct time while
using the stopwatch.
IF STOPWATCH HANDS DO NOT RETURN TO
"60" WHEN THE STOPWATCH IS RESET:
1) PULL out the crown to "B" position
2) PRESS pushers "A" or "B" repeatedly to move
hands to "60" position
3) PUSH in the crown to "A" position
26
ENGLISH

ELAPSED TIME RING

If your watch is equipped with a rotatable outer ring
on the face, with numbers corresponding to minutes,
you can use this Elapsed Time Ring to time an activity
from the start, or to mark the ending time for the
duration of an activity.
TO TIME AN ACTIVITY FROM THE START:
Set the Start/Stop triangle at the time (hour or
minute) when you start the activity (As shown on the
left in the illustration shown below). At completion,
you can see how long the activity took.
27