Use; Warranty; Maintenance Jobs For The End User - Cattini Oleopneumatica YAK 2810 Manual Uso Y Manutención

EN
THE MANUFACTURER IS NOT LIABLE FOR ANY DAMAGE RESULTING AS A CONSEQUENCE OF
DISREGARD FOR THE ABOVE INDICATIONS AND THE WARRANTY CONDITIONS ARE INVALIDATED
SCRAPPING AND DISPOSAL
- The lubricants must be disposed of in compliance with the anti-pollution laws in force.
- Scrapping the jack and its component parts must be carried out by the user in accordance with current laws.

USE

Handling: the jack has a wheel locking system. Wheel movement is controlled by the lever (A), lowering and
lifting them. DWG. 4
Residual pressure inside the wheel locking system tank can be seen on the gauge (B) by the side of the lever.
2. Position the jack under the supports as described in the manual of the vehicle. the manufacturing
company is not responsible for any break or damage to the lifted vehicle or to persons or property due
to an incorrect use of the jack.
3. Quick Lifting: pressing the green key (C) the pistons move quickly up into contact with the load to lift
using only the pressure of the air to do so. DWG. 4
4. Lifting: pressing the red key (D) the motor starts and the jack lifts the load.
5. Millimetric Lifting: the jack has a speed variator (F) that, if activated with selector G, allows the load to be
lifted at a slower or quicker speed depending on the adjustment.
6. Quick Lowering: pressing the black key (E), on the control unit, the pistons retract and the load lowers.
7. Millimetric Lowering: pressing the black key (H) on the side of the control unit, the load lowers very slowly.
8. The jack has a pressure gauge for measuring the air let in from the quick coupling (I).
9. Remote Control: normal lifting and quick lowering can be manoeuvred by means of a remote control. DWG. 5
9.1 Power the circuit by means of the quick coupling (1) on the remote control.
9.2 Pressing the red key (2) the jack lifts the load.
9.3 Pressing the black key (3) the load lowers.
REMEMBER THAT THE JACK IS A LIFTING DEVICE AND NOT A SUPPORTING DEVICE!!
- The operator's employer will have to provide the necessary training and furnish the necessary
information about the pumping and shifting forces.
- Before working with the jack, it is advisable to perform a few operations with no load in order to acquire the
sensitivity necessary to work safely with the jack.
Improper use
The air-hydraulic jack has been designed and made to lift transport vehicles. Any other use of the jack, such as
for instance lifting and/or moving persons, is considered to be definitely improper. All use of the jack not in
conformity with the safety rules listed in this manual is considered to be improper use.

WARRANTY

This jack is covered by a 12-month warranty starting from the date the warranty comes into effect or from the
date the jack leaves our factory if it has not already been rendered effective on-line; it covers all manufacturing
defects but not transport expenses, defects caused by improper use or damages suffered during transport. For
more details please see the card attached to this manual.

MAINTENANCE JOBS FOR THE END USER

- To ensure your jack a long life it is advisable to clean the pistons externally once a fortnight.
- Check the level of oil in the tank at least twice a year: this must be done with the pistons completely
15
THEREOF!