Connect Manually Or Change The Connected Device; Connect Automatically; Delete Pairings; Disconnect A Device - Nokia Auto Navigation 500 Guia Del Usuario

G e t s t a r t e d
If the navigation device was connected to your phone, the Bluetooth
name of the device is displayed. You can define the Bluetooth name in
your phone. The navigation device is shown in the menu of your phone
where you can view the currently paired Bluetooth devices.
You can pair the navigation device with up to eight mobile phones but
connect it to only one phone at a time.

Connect manually or change the connected device

To connect the navigation device manually to a paired phone or change
the connected phone, press the menu key, and tap Phone > Settings >
Phone connections. Tap the desired device and Connect.

Connect automatically

You can set your paired phone to allow an automatic connection with
the navigation device when the navigation device is switched on. To do
this in Nokia devices, change your paired device settings in the
Bluetooth menu.

Delete pairings

To delete a device from the paired devices list, press the menu key, and
tap Phone > . Tap the desired device and Delete > Yes. To delete all
devices, tap Delete all > Yes.

Disconnect a device

To disconnect a device from the navigation device, press the menu key,
and tap Phone > . Tap the desired device and Disconnect.
Alternatively, you can do one of the following:
• End the connection in the Bluetooth menu of your phone.
• Turn off Bluetooth connectivity in the navigation device.
• Switch off the navigation device.

Turn Bluetooth connectivity on or off

To turn off Bluetooth connectivity when no device is connected to the
navigation device, press the menu key, and tap Phone > Cancel > >
.
15