Booster Assembly - Joie Traver Manual De Instrucciones

Booster Assembly

see images -
1 5
1. Squeeze the head support
adjustment latch first and
then slide in lower back
support under the fabric
cover to connect them
together.
1
! CHECK to make sure
two pieces are securely
snapped together by
pulling on them.
2. To attach the backrest to the
base, hook the lower back
support over the seat bar
hinge on the base.
2
3. Rotate the backrest up while
holding the booster seat
until it clicks into an upright
position.
3
5
1
2
3
4. Align the side impact shield
with the slot of lower back
support plastics mounts, and
then insert to lock.
4 5
Adjust the seat
see images
6
6
4
5
6