Brita WHS-201 Instrucciones De Instalación página 12

household filtration
Use and Care
Brita Drop-in Filtration WHS-201
®
Usage and quality of water in your cold water line affect the life of filter cartridges.
Cartridges should be replaced sooner if water pressure at the faucet begins to drop
noticeably or if the filter fails to perform satisfactorily.
After prolonged periods of non-use, it is recommended that the filter be
flushed thoroughly. Let water run for 10 minutes before using.
The filter used with this filter housing has a limited service life. Changes in
taste, odor, and/or flow of the water being filtered indicate that the filter should be
replaced.
Housing
WHS-201 Drop-in Filtration
Replace filters every six months or when flow rate
decreases significantly.
The above flow rates are not performance tested or Certified by NSF.
Replacement Parts
Part Number
WFBAB-200
WFBAO-200
WFBAW-200
WFBAS-300
12
Filter Model Numbers
WHF-103 -Poly Block Replacement Drop-In Filter
(included)
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-104 -Carbon Wrap Sediment Replacement
Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating pressure 30-100 psi (207-690kPa)
WHF-102 - String Wound Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-101 - Poly Pleat Replacement Drop-In Filter
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
Description
Mounting Bracket
O-Ring
Housing Wrench
Mounting Screws (Package of 2)