Brita WHS-201 Instrucciones De Instalación página 5

materials and tools needed
MATERIALS NEEDED FOR 3/4" DIAMETER HOUSING
fittings to
purchase
3/4"
QUANTITY COPPER
PIPE
3/4" O.D. Tube x 3/4" M.I.P.
Compression Male Adapter
2 or 3/4" MPT x 3/4" CTS QC
Adapter (WATTS Water
PEX)
TOOLS
Pipe cutter or hacksaw
2 Adjustable wrenches
Tape Measure
SUPPLIES
Plumber's Tape
Note: For galvanized piping, consult a professional plumber.
• Measure the diameter of the existing pipe.
• Review the Configuration Chart.
• Determine how you will configure your filter.
• Dry assemble the complete unit including all fittings and valves.
fittings to
purchase
WHS-201 installation instructions
Step 1
INLET/OUTLET PORTS
1"
COPPER
PIPE
No individual fitting. It may
be made up of: 1" x 1" sch 40
coupling; 1" x 3/4" sch 40
bushing; 3/4" sch 80 nipple
(2 each); 1" CTS QC Adapter
(WATTS Water PEX) sch
Pipe cutter or hacksaw
2 Adjustable wrenches
Tape Measure
Plumber's Tape
A grounding kit (not included) MUST be installed on
water pipes if the pipes are used to ground electrical
systems, appliances, or phones. Typically these are
homes with metal water pipes.
household filtration
Configure Your Unit
3/4"
PVC
PIPE
3/4" NPT x 3/4" tube 3/4" NPT x 1" tube
Male Adapter Male Adapter
PVC Slip Type PVC Slip Type
Pipe cutter or hacksaw Pipe cutter or hacksaw
2 Adjustable wrenches 2 Adjustable wrenches
Tape Measure Tape Measure
Plumber's Tape
Plumber's Tape
PVC Cleaner PVC Cleaner
PVC Adhesive
PVC Adhesive
Step 1 continued on next page >>
Version 2.0F
1"
PVC
PIPE
5