ESAB Origo Feed 304 TRUCK Manual De Instrucciones página 27

7.2) Repairing
In order to ensure the perfect functioning and performance of ESAB equipment, use only original parts
supplied by ESAB or approved by them. All guarantee undertakings from the supplier cease to apply if the
customer uses non-original or non -approved parts when replacing any of them.
Spare parts can be obtained from the ESAB Authorized Services or from its Sales Distributors listed on the
last page of this Manual. Always inform the Equipment Model and Serial Number of the wire feeder in
question.
8) WIRE FEED MECHANISM
0707611
ARM SHAFT
EED ROLLER Þ
F
(See Table 5.1)
0707700
PRESSURE DEVICE
INLET NOZZLE
(See Tables 5.1 to 5.4) Þ
0707612
SHAFT OF THE
TRACTION
0707613
NUT OF THE
TRACTION
0901002
CENTRAL GEAR Þ
0901168
FEED ROLLER
GEAR Þ
(*) These parts are subject to wear in normal operation conditions, and should be substituted whenever they
present any wear which interferes with the correct feeding of the welding wire.
0707602
ARM
0901168
GEAR Þ
Þ
CENTRAL NOZZLE
( ee ables 5.1 to 5.4) S T
0707600
FEEDER BODY 0707604
MAGNETIC CORE
0707606
RING CONNECTION
0707607
INSULATOR
0707608
(See Tables 5.1 to 5.4)
FLANGE
OUTLET NOZZLE
0707603
ELECTRONIC
CIRCUIT
0904986
EURO CONNECTOR
27
Origo™ Feed 304 Truck