Using The Cooler - Waeco CD-32-AC Instrucciones De Uso

CD-32-AC.book Seite 23 Donnerstag, 17. November 2005 3:23 15
CD-32-AC
Connecting to a 220-240 V AC mains (e. g. at home or in the office)
Caution - Danger of electrocution!
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
Caution - Danger of electrocution!
If you are operating your cooler on board a boat from a mains
connection of 220-240 V AC, you must install a residual current
circuit breaker between the 220-240 V AC mains and the cooler.
Seek advice from a trained technician.
The cooler has a built-in multi-voltage mains adapter with a priority
circuit for connecting to a 220-240 V AC supply. The priority circuit
automatically switches to mains operation if the appliance is con-
nected to a 220-240 V AC supply, even if the 12 V cable is still
connected.
➤ Plug the 220 -240 V connection cable (fig. 3 2, page 2) into the
220-240 V AC connection socket (fig. 2 4, page 2) and
connect it to the 220-240 V AC mains supply.
6.4

Using the cooler

Caution - Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat
that generated during operation can dissipate. Ensure that the ven-
tilation slots are not covered. Make sure that the device is suffi-
ciently far away from walls and other objects so that the air can
circulate.
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the
heated air can dissipate.
➤ Close the cooler, see „Connecting the cooler" on page 22.
Caution – Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
All manuals and user guides at all-guides.com
Operation
23